Section 01-14A: Handles, Locks, Latches and Mechanisms
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Control Switch, Door Lock, F-150, F-250, F-350

 

Removal

  1. Remove retaining screw from window regulator switch housing (14527).

  1. Insert a small thin-bladed screwdriver into spring tab slots, located at front and rear of window regulator switch housing.

  1. Apply pressure on screwdriver to pop window regulator switch housing from front door trim panel (23942).

  1. Remove three connector attaching screws from window regulator switch housing, two for Crew Cab left front.

  1. Remove door lock switch (14028), carefully pry door lock switch from connector pins with a small screwdriver.

Installation

  1. NOTE: The door lock switch is keyed to connector and can only be installed one way.

    Follow removal procedures in reverse order.