Section 03-01A: Engine, 4.9L SFI | 1996 F-150, F-250, F-350 (4x2), F-150, F-250 (4x4) Workshop Manual |
Removal
Using Rotunda Transmission Jack 164-R3508 or equivalent, remove the transmission (7003). Refer to the appropriate transmission section in Group 07.
On a manual transmission, remove the clutch pressure plate (7563) and cover assembly and clutch disc (7550). Refer to Section 08-01.
NOTE: To check flywheel face runout or replace the flywheel ring gear (6384), refer to Section 03-00.
Remove the flywheel attaching bolts and remove the flywheel (6375).
Installation
Follow removal procedures in reverse order.
Coat the threads of the flywheel attaching bolts with oil-resistant sealer and install the bolts.
Tighten in an opposing pattern to 102-115 Nm (75-85 lb-ft).