Section 06-02: Brakes, Rear Drum | 1996 Bronco, F-150, F-250, F-350 4x2 and 4x4 Vehicles Workshop Manual |
Remove and disassemble brake adjuster screw (2041).
Apply Silicone Dielectric Compound D7AZ-19A331-A or equivalent meeting Ford Specification ESE-M1C171-A to the threads and the socket end of the brake adjuster screw. Turn the brake adjuster screw into the brake shoe adjusting screw nut (2047) to the end of the threads and then loosen it one-half turn.
Place the adjusting socket on the brake adjuster screw and install the assembly between the ends of the rear brake shoe and lining (2200) with the brake adjuster screw nearest the secondary brake shoe adjusting screw nut.