Section 01-02: Body Panels, Front End
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Support and Bracket, Front Center

 

Removal

  1. Remove front bumper (17757) as described in Section 01-19.

  1. Remove radiator grille opening panel reinforcement (8A284) as described in Radiator Grille Opening Panel Reinforcement in Removal and Installation portion of this section.

  1. Remove screws securing hood latch support brace (16747) to radiator support (16138) and remove.

 

Installation

  1. Follow removal procedure in reverse order. Tighten hood latch support brace screws to 24-31 Nm (18-23 lb-ft).