Section 03-01B: Engine, 5.0L and 5.8L MFI | 1996 F-150, F-250, F-350 and Bronco Vehicles Equipped with 5.0L or 5.8L MFI Engines Workshop Manual |
| Tool Number/ Description | Illustration |
|---|---|
| T64L-6011-EA Cylinder Ridge Reamer |  |
| T65L-6250-A Camshaft Bearing Set |  |
| T68P-6135-A Piston Pin Remover/Replacer |  |
| T70P-6000 Engine Lifting Brackets |  |
| T71P-6513-B Tappet Bleed Down Wrench |  |
| T74P-6666-A Spark Plug Wire Remover |  |
| T75L-6392-A Clutch Housing Alignment Tool |  |
| T89T-6701-AH Rear Oil Seal Replacer |  |
| T88T-6701-A Crankshaft Seal Replacer/Cover Aligner |  |
| T95P-6701-BH Rear Crankshaft Seal Replacer |  |
| T95P-6701-EH Rear Crankshaft Seal Remover |  |
| T96T-6701-A Rear Crankshaft Seal Adapter |  |
| T96T-6701-B Rear Crankshaft Seal Replacer Spacer |  |
| Tool Number | Description |
|---|---|
| D79L-6731-A | Oil Filter Wrench |
| D79L-6731-B | OIl Filter Wrench |
| D80L-100-A | Impact Slide Hammer |
| D80L-522-A | Gear and Pulley Puller |
| D81L-6002-C | Piston Ring Compressor |
| D87L-9280-A | Disconnect Tool (3/8-Inch) |
| D87L-9280-B | Disconnect Tool (1/2-Inch) |
| TOOL-4201-C | Dial Indicator with Bracketry |
| TOOL-6331-E | Main Bearing Insert Tool |
| TOOL-6500-E | Tappet Leakdown Tester |