Section 04-04: Wheels and Tires | 1996 F-150, F-250, F-350, F-Super Duty Chassis Cab, F-Super Duty Motorhome Chassis and Bronco Workshop Manual |
The hub and rotor assembly for the F-Super Duty and F-Super Duty Commercial Chassis is designed as a two-piece assembly so it can be replaced as individual components or as an assembly. The front and rear brake rotors are the same and are attached to either the front or rear wheel hub (1104) with 10 screw and washer assemblies tightened to 100-200 Nm (74-89 lb-ft).
Remove the front disc brake hub and rotor (1102). Refer to Section 06-03.
For vehicles with two-piece hub and rotor assemblies, remove and install the lug bolts (1107). Refer to Section 04-01A or Section 04-01B.