Section 06-02: Brakes, Rear Drum
1996 Bronco, F-150, F-250, F-350 4x2 and 4x4 Vehicles Workshop Manual
SPECIFICATIONS

SPECIFICATIONS

Fluid Specifications

Use Ford High Performance DOT 3 Brake Fluid C6AZ-19542-AA or DOT 3 equivalent fluid meeting Ford specification ESA-M6C25-A.

Brake Specifications
VehicleF-250 H.D. 4x2 & 4x4 All F-350 SRWF-150 BroncoF-250 4x2, 4x4 All CabsF-350/DRWa
Axle Usage — Front4200
4600
3400/38003900/4200
5000
4200
4600
Axle Usage — Rear5400
6250
380053006340/7400/
7800/8250
TypeDSSADSSADSSADSSA
Size (Inches)12x3.011-1/32x2.2512x2.512-1/8x3.5
Cylinder Diameter (Inches)b1.06251.01.01.1875
Lining Thickness (Inches) — Primary.204.224.203.220
Lining Thickness (Inches) — Secondary.267.299.266.283
Lining Length (Inches) — Primary11.4010.4611.0611.57
Lining Length (Inches) — Secondary12.8610.6212.6013.05
Area Per Brake
(Sq. Inches) — Primary
38.4623.4327.6540.49
Area Per Brake
(Sq. Inches) — Secondary
38.4623.7931.5045.67
Total Area Per Brake (Sq. Inches)72.5547.2259.1586.17
Total Area Per Axle (Sq. Inches)145.194.44118.30172.34
Swept Area Per Axle (Sq. Inches)226.20155.27188.50266.64
a F-Super Duty chassis and stripped chassis use disc brakes in rear.
b Max. allowable hone 0.003.
Brake Drum

Brake drum (1126) must be replaced if inside diameter is outside maximum limit. Maximum drum diameter is stamped on the outside of the brake drum.

 
WHEEL TORQUE SPECIFICATIONS
DescriptionNmLb-Ft
F-150, Bronco
(5-Lug Wheel — 1/2-20)
135100
F-250, F-350
(8-Lug Wheel — 9/16-18)
190140

NOTE: Torque specifications are for clean, dry, dirt- and paint-free bolt and nut threads. Never use oil or grease on studs or nuts.