Support Bracket

Removal

1. Remove the rotor. Refer to Rotor in the Removal and Installation portion of this section.

2. Remove the three disc brake caliper support bracket-to-rear axle flange bolts and nuts.

   

   Item	Part Number	Description
   1	2B292	Disc Brake Caliper Support Bracket
   2	42499	Rotor Shield Bolt (3 Req'd)
   3	2C028	Rear Wheel Disc Brake Shield
   4	1102	Rotor
   5	N605831-S2	Bolt, Disc Brake Caliper Support Bracket-to-Rear Axle Flange (3 Req'd)
   6	—	Rear Axle Flange (Part of 4001)
   A	—	Tighten to 7-9 Nm (62-79 Lb-In)
   B	—	Tighten to 100-135 Nm (74-100 Lb-Ft)

3. Remove the disc brake caliper support bracket from the vehicle.

Installation

1. Reverse the removal procedure.

2. Tighten the disc brake caliper support bracket-to-rear axle flange nuts to 100-135 Nm (74-100 lb-ft).