Section 06-05: Brake System, Parking
1996 Bronco, F-150, F-250, F-350, F-Super Duty Chassis Cab and Motorhome Chassis Vehicles Workshop Manual
CLEANING AND INSPECTION

Signal Switch and Bracket, Parking Brake

  1. Inspect the parking brake control (2780) and remove any debris that may interfere with the operation of the parking brake control or the parking brake signal switch and bracket.

  1. Remove and replace the parking brake signal switch and bracket connector several times to improve contact.

  1. Apply the parking brake and turn the key to ON. The brake warning indicator should illuminate.

  1. Release the parking brake control and the brake warning indicator should go out.