Section 06-09B: Brake, Anti-Lock, 4-Wheel | 1996 Bronco Workshop Manual |
| Description | Nm | Lb-Ft | Lb-In |
|---|---|---|---|
| Booster-to-Dash Panel Nut | 18-34 | 13-25 | — |
| Brake Tube-to-Master Cylinder Fitting | 14-24 | 10-18 | — |
| Master Cylinder-to-Booster Nut | 18-34 | 13-25 | — |
| Hydraulic Control Unit-to-Bracket Nut | 16-24 | 12-18 | — |
| Brake Tube Fitting | 14-24 | 10-18 | — |
| Anti-Lock Brake Electronic Control Module Screw | 7-9 | — | 62-80 |
| Front Brake Anti-Lock Sensor Bolt | 5-6 | — | 44-53 |
| Wheel Lug Nuts | 115-142 | 85-105 | — |
| Mounting Bracket Through Bolt | 40-60 | 30-44 | — |
| Mounting Bracket Bolt | 16-27 | 12-20 | — |
| Mounting Clip Retaining Bolt | 16-27 | 12-20 | — |
| Mounting Bracket Screw | 17-27 | 14-19 | — |
| Reservoir Screw | 2-3 | — | 18-26 |
| Radiator Screw | 9-13 | — | 80-115 |
| Bracket Nut | 24-34 | 14-24 | — |
| Hydraulic Control Unit Mounting Bracket-to-Frame Bolts | 34-46 | 25-33 | — |
| Vehicle Speed Sensor Hold-Down Bolts | 34-40 | 25-30 | — |
| Anti-Lock Brake Electronic Control Module Connector Bolt | 6-7 | — | 53-62 |