Section 07-01A: Transmission, Automatic, E4OD | 1996 All F-Series and Bronco with E4OD Automatic Transmission Workshop Manual |
E4OD Transmission, Disassembled View

| Item | Part Number | Description |
|---|---|---|
| 1 | 7902 | Converter Assembly |
| 2 | 87650-S2 | Plug Converter Drain 1/8 In. 27 |
| 3 | 7017 | Shaft Input |
| 4 | 7L323 | Seal Front Pump Support |
| 5 | 7A248 | Seal Front Pump |
| 6 | 7B258 | Bushing Front Pump |
| 7 | 7A248 | Seal Front Pump (O-Ring) |
| 8 | N805260-S | Bolt and Washer Assembly (Front Pump to Case) |
| 9 | 7G379 | Washer Replacement (9 Req'd) |
| 10 | 7A103 | Pump Assembly Front |
| 11 | 7D014 | Washer Pump Thrust No. 1 |
| 12 | 7E486 | Bearing Assembly Overdrive Sun Gear No. 2 |
| 13 | 7A136 | Gasket Pump |
| 14 | 7G402 | Seal Coast Clutch (2 Req'd) |
| 15 | 7G387 | Cylinder Assembly Coast |
| 16 | 7A548 | Seal Coast Clutch Inner |
| 17 | 7A548 | Seal Coast Clutch Outer |
| 18 | 7A262 | Piston Coast Clutch |
| 19 | 7N519 | Ring Coast Clutch Piston Apply |
| 20 | 7B070 | Spring Coast Clutch Piston Disc |
| 21 | 7A527 | Ring Coast Clutch Disc Spring Retainer |
| 22 | 7B164 | Plate Coast Clutch Internal Spline Friction |
| 23 | 7B442 | Plate Coast Clutch External Spline Steel |
| 24 | 7B066 | Plate Coast Clutch Pressure |
| 25 | 7D483 | Ring Coast Clutch Pressure Plate Retaining (Selective Fit) |
| 26 | 7D063 | Gear Assembly Overdrive Sun |
| 27 | 377155-S | Ring Retaining (Attaches Clutch Assembly Overdrive One-Way to Overdrive Ring Gear) |
| 28 | 377300-S | Ring Retaining (Attaches Gear Assembly Overdrive Sun to Cylinder Assembly Coast) |
| 29 | 377135-S | Ring Retaining (OWC to Outer Race) |
| 30 | 7A089 | Clutch Assembly Overdrive One-Way |
| 31 | 7L339 | Washer Overdrive Overrun Clutch Thrust No. 3 |
| 32 | 7B446 | Planet Assembly Overdrive |
| 33 | 7F240 | Bearing Assembly Overdrive Planet Thrust No. 4 |
| 34 | 7A153 | Gear Overdrive Ring |
| 35 | 7A658 | Shaft Overdrive Center |
| 36 | 7D483 | Ring Overdrive CL Pressure Plate Retainer (Selective Fit) |
| 37 | 7G375 | Ring Retaining (Retaining Center Overdrive Shaft Assembly to Overdrive Ring Gear) |
| 38 | 7G178 | Bearing Assembly Overdrive Center Shaft Thrust No. 5 |
| 39 | 7B066 | Plate Overdrive Clutch Pressure |
| 40 | 7B164 | Plate Overdrive Clutch Internal Spline Friction |
| 41 | 7B442 | Plate Overdrive Clutch External Spline Steel |
| 42 | 7A527 | Ring Overdrive Clutch Disc Spring Retaining |
| 43 | 7B070 | Spring Overdrive Clutch Piston Disc |
| 44 | 7A262 | Piston Overdrive Clutch |
| 45 | 7A548 | Seal Overdrive Clutch Piston Outer |
| 46 | 7F225 | Seal Overdrive Clutch Piston Inner |
| 47 | 7D483 | Ring Intermediate Cylinder Retaining |
| 48 | 7Z059 | Bolt M10-1.5 x 24mm Overdrive Cylinder Fluid Feed |
| 49 | 7G384 | Cylinder Overdrive and Intermediate Clutch |
| 50 | 7F225 | Seal Intermediate Clutch Piston Inner |
| 51 | 7E005 | Piston Intermediate Clutch |
| 52 | 7F224 | Seal Intermediate Clutch Piston Outer |
| 53 | 7B070 | Spring Intermediate Clutch Piston Disc |
| 54 | 7Z059 | Bolt M12-1.75 x 31mm Center Support Fluid Feed (2 Req'd) |
| 55 | 7A130 | Support Assembly Center |
| 56 | 7L326 | Washer Center Support Thrust No. 6 |
| 57 | 7D025 | Seal Direct Clutch Cast Iron (2 Req'd) |
| 58 | 7B066 | Plate Intermediate Clutch Pressure Apply |
| 59 | 7B164 | Plate Intermediate Clutch Internal Spline Friction |
| 60 | 7B442 | Plate Intermediate Clutch External Spline Steel |
| 61 | 7B066 | Plate Intermediate Clutch Pressure Rear |
| 62 | 7D021 | Piston Assembly Intermediate Band Servo |
| 66 | 7D034 | Band Assembly Intermediate |
| 67 | 7A089 | Clutch Assembly Intermediate One-Way * |
| 68 | 7G401 | Washer Intermediate One-Way Clutch Thrust No. 7 |
| 69 | 7D044 | Drum Assembly Intermediate Brake |
| 70 | 7A548 | Seal Direct Clutch Piston Inner |
| 71 | 7A548 | Seal Direct Clutch Piston Outer |
| 72 | 7A262 | Piston Assembly Direct Clutch |
| 73 | 7A262 | Retainer and Spring Assembly Direct Clutch |
| 74 | 7C122 | Ring Direct Clutch Support Spring Retaining |
| 75 | 7C096 | Washer Intermediate Brake Drum Thrust No. 8A |
| 76 | 7B164 | Plate Direct Clutch Internal Spline Friction |
| 77 | 7B442 | Plate Direct Clutch External Spline Steel |
| 78 | 7B066 | Plate Direct Clutch Pressure |
| 79 | 377126-S - 377127-S 377128-S 377437-S | Ring Direct Clutch Pressure Plate Retaining (Selective Fit) Ring Retaining Ring Retaining Ring Retaining |
| 80 | 7D019 | Seal Forward Clutch Cylinder (2 Req'd) |
| 81 | 7F374 | Bearing Assembly Forward Clutch Needle Thrust No. 8B |
| 82 | 7A360 | Cylinder Assembly Forward Clutch |
| 83 | 7A548 | Seal Forward Clutch Piston Inner |
| 84 | 7A548 | Seal Forward Clutch Piston Outer |
| 85 | 7A262 | Piston Assembly Forward Clutch |
| 86 | 7D256 | Ring Forward Clutch Piston Spring |
| 87 | 7B070 | Spring Forward Clutch Piston Disc |
| 88 | 377127-S | Ring Forward Clutch Spring (FWD CL Piston Spring to FWD CL Cylinder Assembly) |
| 89 | 7B066 | Plate Forward Clutch Pressure |
| 90 | 7E085 | Spring Forward Clutch Pressure |
| 91 | 7B164 | Plate Forward Clutch Internal Spline Friction |
| 92 | 7B442 | Plate Forward Clutch External Spline Steel |
| 93 | 7B066 | Plate Forward Clutch Pressure Rear |
| 94 | 377127-S - 377437-S 377444-S 386841-S 386842-S | Ring Direct Clutch Pressure Plate Retaining (Selective Fit) Ring Retaining Ring Retaining Ring Retaining Ring Retaining |
| 95 | 7D090 | Washer Forward Clutch Hub Thrust |
| 96 | 377132-S | Ring Forward Hub Retaining (FWD Ring Gear Hub to FWD Ring Gear) No. 8C |
| 97 | 7B067 | Hub Forward Ring Gear |
| 98 | 7D392 | Gear Forward Ring |
| 99 | 7D234 | Bearing Assembly Forward Clutch Thrust (Between FWD Ring Gear and FWD Planet Assembly) No. 9A |
| 100 | 7A166 | Washer Forward Planet Carrier Thrust No. 10A |
| 101 | 7A398 | Planet Assembly Forward |
| 102 | 7D234 | Bearing Assembly Forward Clutch Thrust (Between FWD Planet Assembly and FWD Sun Gear Assembly) No. 9B |
| 103 | 7D063 | Gear Assembly Forward/Reverse Sun |
| 104 | 7D064 | Shell Input |
| 105 | 7D066 | Washer Input Shell Thrust No. 14 |
| 106 | 377300-S | Ring Retaining (Attaches FWD/REV Sun Gear Assembly to Input Shell) |
| 107 | 7D483 | Ring Reverse Clutch Pressure Plate Retaining |
| 108 | 7B066 | Plate Reverse Clutch Pressure |
| 109 | 7B442 | Plate Reverse Clutch External Spline Steel |
| 110 | 7B164 | Plate Reverse Clutch Internal Spline Friction |
| 111 | 7E085 | Spring Transmission Reverse Clutch Cushion |
| 112 | 377155-S | Ring Reverse Planet Retaining |
| 113 | 7A166 | Washer Planet Carrier Thrust (Between Reverse Planet Assembly and Input Shell) No. 10B |
| 114 | 7D006 | Planet Assembly Reverse |
| 115 | 7A166 | Washer Planet Carrier Thrust (Between Reverse Planet Assembly and Output Shaft Hub) No. 11 |
| 116 | 387031-S | Ring Retaining (Retaining Output Shaft Hub to Output Shaft Assembly) |
| 117 | 7A153 | Gear Output Shaft Ring |
| 118 | 7D164 | Hub Output Shaft * |
| 119 | 377132-S | Ring Retaining (Retaining Output Shaft Hub to Output Shaft Ring Gear) |
| 120 | 7B067 | Hub Assembly Reverse Clutch |
| 121 | 7A089 | Clutch Assembly Reverse One-Way |
| 122 | 7G178 | Bearing Assembly Output Shaft Hub Thrust No. 12 |
| 123 | 7D406 | Retainer and Spring Assembly Reverse Clutch |
| 124 | 7D404 | Seal Reverse Clutch Piston Inner |
| 125 | 7D403 | Seal Reverse Clutch Piston Outer |
| 126 | 7D402 | Piston Reverse Clutch |
| 127 | 7025 | Bushing Case Front (3 Lube Grooves) |
| 128 | 7005 | Case Assembly |
| 129 | 7034 | Vent Assembly Case |
| 130 | 7D273 | Connector Assembly Fluid Tube Inlet (Front) |
| 131 | N605770-S36 | Bolt (Attaches Heat Shield to Case) |
| 132 | 7A434 | Heat Shield |
| 133 | 7D174 | Valve Assembly Converter Drain Back Check (Rear) |
| 134 | 7025 | Bushing Case Rear (1 Lube Groove) |
| 135 | 7D167 | Bolt (5 Req'd) 5/16 x 1.9 (One-Way Clutch to Case) |
| 136 | 7B368 | Washer Output Shaft Thrust Rear No. 13 |
| 137 | 7A233 | Gear Output Shaft Parking |
| 138 | 7060 | Output Shaft Assembly (4x2) |
| 139 | 7086 | Gasket Extension Housing |
| 140 | 7A039 | Extension Assembly (4x2) |
| 141 | N605803-S36 | Bolt Extension Assembly to Case (Top) (7 Req'd) |
| 142 | 7H102 | Bracket Wiring Not serviced separately. |
| 143 | N605802-S36 | Bolt Extension Assembly to Case (4x2 Bottom) (2 Req'd) |
| 144 | 7A034 | Bushing Extension Housing (4x2) |
| 145 | 7052 | Seal Extension Housing (4x2) |
| 146 | 7H183 | Plug Assembly Extension Housing |
| 147 | 57621-S2 | Screw and Washer Assembly 1/4-20 x .62 (Plug Assembly to Extension Assembly) |
| 148 | 7060 | Output Shaft Assembly (4x4) |
| 149 | 7A039 | Extension Assembly (4x4) and Super Duty |
| 150 | N606569-S36 | Bolt Extension Assembly to Case (Super Duty and 4x4 Bottom) (2 Req'd) |
| 151 | 7A020 | Indicator Assembly Fluid Level |
| 152 | 7A228 | Tube Assembly Fluid Filler |
| 153 | 391308-S | O-Ring Filler Tube |
| 154 | 7A160 | Tube Fluid Inlet Short |
| 155 | N805232-S | Screw and Washer Assembly M8-1.25 x 23.8 (2-Attaches 7D419 to 7005) |
| 156 | 7D419 | Plate Parking Rod Guide |
| 157 | 7D070 | Spring Parking Pawl Return |
| 158 | 7A441 | Pawl Parking |
| 159 | 7D071 | Shaft Park Pawl |
| 160 | N805261-S191 | Bolt M8-1.25 x 25.9mm (Attaches Park Pawl Act Abutment to Case) |
| 161 | 7G101 | Abutment Parking Pawl Actuating |
| 162 | 372552-S2 | Nut 3/8 Spring (Attaches Service ID Tag to Case) |
| 163 | 7B148 | Tag Transmission Service ID ** |
| 164 | N620482-S2 | Nut M10-1.5 Hex (Attaches Manual Lever Assembly to Case) |
| 165 | 7A256 | Lever Assembly Manual Control |
| 166 | N805312-S100 | Bolt Assembly Transmission Range Sensor to Case (2 Req'd) |
| 167 | 7A247 | Sensor Transmission Range |
| 168 | 7C493 | Shaft Manual Control Lever |
| 169 | 7B498 | Seal Manual Control Lever |
| 170 | 7B210 | Pin Manual Lever Retaining |
| 171 | 7A232 | Rod Assembly Parking Pawl Actuating |
| 172 | 7A115 | Lever Manual Control Valve Detent Inner |
| 173 | N800287-S36 | M14-1.5 Hex Inner Detent Lever (7A115 to 7C493) |
| 174 | N805503-S | Bolt Manual Valve Detent Spring Assembly to Case |
| 175 | 7E332 | Spring Assembly Manual Valve Detent |
| 176 | 390685-S | Plug Test Port 1/8-27 Hex Head (2 Req'd) ** |
| 177 | N805330-S | Stud Valve Body Assembly to Case Solenoid Valve Body to Case Accumulator Body Assembly to Case |
| 178 | 7N171 | Plug Converter Access |
| 179 | 7E195 | Ball Rubber Check (8 Req'd) |
| 180 | N805331-S | Stud Main Control Assembly to Case |
| 181 | 7D017 | Spring EPC Blow-Off |
| 182 | 353351-S | Ball EPC Blow-Off |
| 183 | 7C155 | Gasket Valve Body Separator Plate |
| 184 | 7A008 | Plate Valve Body Separator |
| 185 | 7D100 | Gasket Valve Body Separator Plate to Case |
| 186 | 7G308 | Screen Assembly Solenoid |
| 187 | 7A100 | Valve Body Assembly |
| 188 | 7F282 | Plate Valve Body Reinforcing ** |
| 189 | N805503-S | Bolt Valve Body Reinforcing Plate to Case (3 Req'd) |
| 190 | 7G391 | Solenoid Valve Body Transmission Control |
| 191 | N805329-S | Bolt Solenoid Valve Body to Case (9 Req'd) |
| 192 | N805326-S | Bolt Valve Body Assembly to Case and Accumulator Body Assembly to Case (18 Req') |
| 193 | N805327-S | Bolt Valve Body Assembly to Case |
| 194 | N805328-S | Nut Valve Body Assembly to Case Solenoid Valve Body to Case Accumulator Body Assembly to Case |
| 195 | 7G422 | Control Assembly Accumulator Body |
| 196 | 7A191 | Gasket Transmission Pan |
| 197 | 7A098 | Screen Assembly Transmission Pan (4x2) * |
| 198 | 7A194 | Pan Assembly Transmission (4x2) |
| 199 | 7L027 | Magnet Transmission Pan ** |
| 200 | N605902-S36 | Bolt Pan Assembly to Case |
| 201 | 7A098 | Screen Assembly Transmission Pan (4x4) * |
| 202 | 7A194 | Pan Assembly Transmission (4x4) |