Section 07-01C: Transmission, Automatic, 4R70W
1996 F-150 (4x2) (4x4) and Bronco Vehicles Equipped with 5.0L Engines Workshop Manual
CLEANING AND INSPECTION

Transmission

Clean all parts with suitable solvent and use moisture-free air to dry off all parts and clean out fluid passages.

NOTE: The composition clutch plates, bands and synthetic seals should not be cleaned in a vapor degreaser or with any type of detergent solution.

To clean these parts, wipe with a lint-free cloth. New clutch plates or bands should be soaked in the specified transmission fluid for 15 minutes before assembly.