Section 07-02: Transmission, Automatic, Cooling
1996 F-Series, Bronco Workshop Manual
REMOVAL AND INSTALLATION

Fluid Cooler Hose(s)

 

Removal

  1. Place a drain pan under the fluid cooler hose to be removed.

  1. Loosen the fluid cooler hose clamps.

  1. Remove the fluid cooler hose.

 

Installation

To install, reverse the removal procedure. Replenish transmission fluid to proper operating levels. Start engine and check for leaks.

Tighten the fluid cooler hose clamps to 3.1-4.3 Nm (27.4-38 lb-in).