Section 07-07A: Transfer Case, Electronic Shift
1996 F-150 4x4 Vehicles with Automatic Transmissions and All Bronco Vehicles Workshop Manual
REMOVAL AND INSTALLATION

Control Module, Electronic

Removal

  1. Remove the right cowl panel kick pad.

  1. Remove the two module attaching screws.

  1. Lift out the module and disconnect the three wiring connectors. Remove module assembly.

Installation

  1. Follow removal procedures in reverse order.

ItemPart NumberDescription
17E453Transfer Case Electronic Control Module
2N621905-S2Nut
3—Three-Finger Bracket
(Part of 14401)
414B095Wire Harness
5N381801-S36BXScrew