Inspection and Verification

1. Verify the vehicle owner's original concern by operating the clutch system to duplicate the condition.

2. Inspect to determine if any of the following components are damaged:

   • clutch release hub and bearing (7548)
   • clutch pedal (7519)
   • flywheel housing
   • clutch disc (7550)

3. Check transmission fluid level and fluid condition.

4. Check the vehicle for signs of clutch fluid leakage. Refer to Section 08-02 for an illustration of the clutch systems.

5. If the concern(s) remain after the inspection, determine the symptoms and proceed to the symptom chart.