Section 08-00: Clutch System, Service
1996 F-150, F-250, F-350, F-Super Duty Chassis Cab and Bronco Equipped with Manual Transmission Workshop Manual
CLEANING AND INSPECTION

Clutch Pressure Plate

  1.  CAUTION: Do not use cleaners with a petroleum base, and do not immerse the clutch pressure plate (7563) in the solvent.

    NOTE: The Belleville design clutch pressure plates do not need to be lubricated.

    Clean clutch pressure plate and flywheel (6375) with a suitable commercial alcohol base solvent so surfaces are free from any oil film.

  1. Inspect surface of clutch pressure plate for burn marks, scores, flatness or ridges.

  1. If the clutch pressure plate is badly heat-checked or deeply scored, replace clutch pressure plate and cover assembly.

  1. Check clutch pressure plate finger heights.

  1. If a substantial difference in finger wear exists, the heavily worn finger is binding. Replace the clutch pressure plate.