Section 12-02: Heating and Defrosting
1996 F-150, F-250, F-350, F-Super Duty and Bronco, F-Super Duty Motorhome Chassis Workshop Manual
REMOVAL AND INSTALLATION

Climate Control Assembly Illumination Bulbs

 

Removal

  1. Remove trim strip above heater control (18549) and glove compartment area.

  1. Remove two screws that attach the center finish trim panel to the instrument panel (04320). Refer to Section 01-12.

  1. Remove four screws that attach the heater control to the instrument panel.

  1. Pull heater control away from the instrument panel far enough to gain access to the instrument panel lamp socket and bulb (13B765) (two in control).

  1. Rotate instrument panel lamp socket and bulb one quarter turn and remove from the heater control.

  1. Pull miniature bulb from socket and replace.

 

Installation

  1. Follow removal procedures in reverse order.