Section 17-01: Lighting, Exterior
1996 F-150, F-250, F-350, F-Super Duty Motorhome and Bronco Workshop Manual
DESCRIPTION AND OPERATION

Hazard Flasher Switch

The turn indicator/hazard flasher switch is located in the upper steering column hub. The turn signal is operated by the multi-function switch (13K359) on the left side of the hub. The hazard warning flasher switch (13A350) is located on the right side of the hub. Two flasher units are used, one for the turn indicator circuit and the other for the hazard flasher circuit.

To operate the turn indicators, the ignition switch lock cylinder (11582) must be in the RUN position on the F-150, F-250, F-350, F-Super Duty Chassis Cab and Bronco. The hazard system is operated independently of the ignition switch lock cylinder by actuating the hazard warning switch.

On F-Series Motorhome Chassis, an electronic flasher is used to control both the turn indicator and hazard warning. The electronic flasher is located on the left side of steering column support.