Section 17-01: Lighting, Exterior
1996 F-150, F-250, F-350, F-Super Duty Motorhome and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Headlamp Assembly

Removal

  1. Remove radiator air deflector from radiator support.

  1. Remove two screws and two nuts retaining headlamp door (13064).

  1. Pull headlamp door from vehicle. Remove three bulbs and sockets.

  1. Disconnect engine control sensor wiring (12A581) from headlamp bulb (13007).

  1. Remove two retainers attaching upper two attachments of headlamp (13008).

  1. Turn horizontal headlamp adjusting screw (13032) completely out of the adjusting nut.

  1. Pull headlamp from vehicle.

 

Installation

  1. Follow removal procedures in reverse order.

  1. Tighten screws to 1.4-2.3 Nm (13-20 lb-in). Tighten nuts to 4-7 Nm (36-61 lb-in).

  1. Check headlamp aim. Refer to Headlamp in the Adjustments portion of this section.