Section 17-01: Lighting, Exterior | 1996 F-150, F-250, F-350, F-Super Duty Motorhome and Bronco Workshop Manual |
Lamp Assembly
Removal
Remove nuts and screws attaching headlamp door (13064).
Pull headlamp door away from headlamp bulb (13007) and disconnect socket from lamp body.
Installation
Follow removal procedures in reverse order.
Item | Part Number | Description |
---|---|---|
1 | — | Adjusting Screw Assembly (Part of 13005) |
2 | N801603 | Screw (2 Req'd Each Side) |
3 | 13005 | Headlamp Assembly |
4 | 13N019 | Headlamp Bulb Retainer |
5 | N806851 | J-Nuts (2 Req'd) |
6 | 8A184 | Radiator Grill Opening Panel Reinforcement |
7 | 13N020 | Headlamp Retainer Clip |
8 | 12A581 | Wiring Assembly |
9 | N621906 | Nut and Washer (2 Req'd) |
10 | 13465 | Bulb No. 916NA |
11 | 13064 | Headlamp Door |
12 | 13465 | Bulb No. 3157 |
13 | 13465 | Bulb No. 916 |
A | — | Tighten to 4-7 Nm (36-61 Lb-In) |
B | — | Tighten to 1.4-2.3 Nm (13-20 Lb-In) |