1996 PCED OBDI
SECTION 18: Diesel Diagnosis — 7.3L DI Engine
K: Brake On/Off (BOO) Switch
Introduction
  K: Pinpoint Tests  

Note

You should enter this pinpoint test only when you have been directed here from symptom flowcharts.

Remember

This pinpoint test is intended to diagnose only the following:

Description

The BOO input is wired to the stoplamp circuit and informs the PCM when the brake is applied. The BOO input is used to disengage the speed control system.





DTC Description

0703 = Brake Switch B circuit malfunction.

 

 

  K: Pinpoint Tests