1997 PCED OBDII-Diesel
SECTION 5C: Pinpoint Tests
K: Brake Lamp Switch
Introduction
  K: Pinpoint Tests  

Note

Enter this pinpoint test only when directed here from symptom flowcharts.

Remember

This pinpoint test is intended to diagnose only the following:

Description

The BOO input is wired to the stoplamp circuit and informs the PCM when the brake is applied. The BOO input is used to disengage the speed control system.





DTC Description

P0703 = Brake Switch B circuit malfunction

 

 

  K: Pinpoint Tests