N: Clutch Pedal Position (CPP) Switch Introduction

N: Pinpoint Tests

Note

Enter this pinpoint test only when directed here from symptom flowcharts.

Remember

This pinpoint test is intended to diagnose only the following:

• clutch pedal position switch (CPP) (11A152)
• powertrain control module (PCM) (12A650)
• harness circuits: CPP and SIG RTN

Description

This switch detects when the clutch pedal is depressed (manual transmissions) to disable the speed control system and PTO/raised-idle mode. Switch actuation occurs as the clutch is initially depressed prior to disengaging the transmission at the top of travel.

N: Pinpoint Tests